Jeep Recalls Jeep Gallery

2020 Jeep Gladiator Recalls

Component

POWER TRAIN:CLUTCH ASSEMBLY

Manufacturer

Chrysler (FCA US, LLC)

NHTSA Campaign ID21V028000
SummaryChrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
ConsequenceOverheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
RemedyFCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge.' FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Manufacturer

Chrysler (FCA US LLC)

NHTSA Campaign ID20V191000
SummaryChrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4' or 12' radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, 'Rearview Mirrors.'
ConsequenceThe lingering rearview image can distract the driver, increasing the risk of a crash.
RemedyChrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

SEAT BELTS:FRONT:RETRACTOR

Manufacturer

Chrysler (FCA US LLC)

NHTSA Campaign ID20V580000
SummaryChrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and Ram 2500, 2019-2020 Ram 1500 and 2020 Jeep Gladiator vehicles. In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking.
ConsequenceIn the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.
RemedyChrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge. The recall began November 12, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W67.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

POWER TRAIN:CLUTCH ASSEMBLY

Manufacturer

Chrysler (FCA US LLC)

NHTSA Campaign ID20V124000
SummaryChrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
ConsequenceThe overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
RemedyChrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Component

POWER TRAIN:DRIVELINE:DRIVESHAFT

Manufacturer

Chrysler (FCA US LLC)

Mfr Report Date20181215
NHTSA Campaign ID19V636000
SummaryChrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator vehicles. The rear driveshafts may have been incorrectly assembled without grease in the monoblock joint.
ConsequenceA joint without grease may overheat and seize, possibly causing the driveshaft to fracture, resulting in a sudden loss of drive power. If the driveshaft completely separates from the vehicle it may become a road hazard. Either of these scenarios can increase the risk of a crash.
RemedyFCA US will notify owners, and dealers will replace the driveshaft, free of charge. The recall began October 10, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA US number for this recall is V95.
NotesOwners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Information provided by NHTSA
Data updated January 2023

Q: Does the 2020 Jeep Gladiator have any vehicle recalls?
A: Yes, the 2020 Jeep Gladiator has atleast 16 recalls.

Q: What are the 2020 Jeep Gladiator recalls?
A: The 2020 Jeep Gladiator recalls include: POWER TRAIN:CLUTCH ASSEMBLY, BACK OVER PREVENTION: SENSING SYSTEM: CAMERA, SEAT BELTS:FRONT:RETRACTOR, POWER TRAIN:CLUTCH ASSEMBLY, POWER TRAIN:DRIVELINE:DRIVESHAFT

.

Vehicle information, history, and specifications from concept to production.