These are standard specifications for the 1968 Toyota Corona, not necessarily specifications for the vehicle(s) in the photo(s).
Transmission:
3 Manual Column shift
Chassis # RT52-34840
View info And history
Auction entries : 1
Information provided by NHTSA
Data updated June 2024
Features
Engine Location : | Front |
Drive Type : | Rear Wheel |
Body / Chassis : | Steel unibody |
Production Years for Series : | 1964 - 1969 |
Price : | $1,800-$2,000 |
Weight : | 2200 lbs | 997.903 kg |
Performance
Top Speed : | 91 mph | 146.419 km/h |
Engine & Transmission
Inline 4 | |
---|---|
Displacement : | 1879 cc | 114.7 cu in. | 1.9 L. |
Power : | 90 BHP (66.24 KW) @ 4600 RPM |
Torque : | 110 Ft-Lbs (149 NM) @ 2600 RPM |
Bore : | 3.5 in | 88 mm. |
Stroke : | 3.1 in | 78 mm. |
Compression : | 8.0:1 |
3 Manual Column shift
Production Figures
Total Toyota Production for 1968 : | 476,807 |
1968 Toyota Corona |
Dimension(s)
Sedan
Seating Capacity : | 4 |
Doors : | 4 |
Exterior | |
---|---|
Length : | 162.4 in | 4125 mm. |
Width : | 61.0 in | 1549 mm. |
Height : | 55.9 in | 1420 mm. |
Wheelbase : | 95.3 in | 2421 mm. |
Front Track : | 48.5 in | 1232 mm. |
Rear Track : | 48.5 in | 1232 mm. |
Hardtop Coupe
Chassis # RT52-34840
View info And history
Auction entries : 1
Price : | $2,000 |
Weight : | 2200 lbs | 997.903 kg |
Seating Capacity : | 4 |
Doors : | 2 |
Exterior | |
---|---|
Length : | 162.4 in | 4125 mm. |
Width : | 61.0 in | 1549 mm. |
Height : | 55.9 in | 1420 mm. |
Wheelbase : | 95.3 in | 2421 mm. |
Front Track : | 48.5 in | 1232 mm. |
Rear Track : | 48.5 in | 1232 mm. |
Handling
Suspension | |
---|---|
Front : Unequal-length A-arms and coil springs Rear : Rigid axle with semi-elliptic leaf springs |
Steering | |
---|---|
Worm and Sector |
Tires / Wheels | |
---|---|
Tires : | 5.60x13 |
Recall
Component | UNKNOWN OR OTHER |
---|---|
Manufacturer | TOYOTA MOTOR CO., LTD. |
NHTSA Campaign ID | 71V084000 |
Notes | TOYOTA CAMPAIGN NO 013.POSSIBILITY THAT ITEMS PLACED IN PACKAGE TRAY UNDERTHE RIGHT DASH PANEL MAY INADVERTENTLY FALL OVER PROTECTIVE PARTITION AND CAUSEPOSSIBLE MALFUNCTION OF ACCELERATOR LINKAGE.(CORRECT BY INSTALLING NEWPARTITION.) |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
---|---|
Manufacturer | TOYOTA MOTOR CO., LTD. |
NHTSA Campaign ID | 69V090000 |
Notes | POSSIBILITY THAT BRAKE TUBES COATED WITH 'SOLDER' MAY CORRODE AND CAUSE BRAKEFLUID LEAKAGE AND SUBSEQUENT BRAKE FAILURE.(CORRECT BY REPLACING BRAKE TUBESWITH ZINC COATED TUBES.) |
Component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
---|---|
Manufacturer | TOYOTA MOTOR CO., LTD. |
Mfr Report Date | 19651201 |
NHTSA Campaign ID | 69V138000 |
Notes | POSSIBILITY THAT BRAKE TUBES COATED WITH 'SOLDER' MAY, UNDER ADVERSE WEATHERAND ROAD CONDITIONS, CORRODE AND CAUSE BRAKE FLUID LEAKAGE AND SUBSEQUENT BRAKEFAILURE.(CORRECT BY REPLACING BRAKE TUBES WITH ZINC COATED TUBES.) |
Component | FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM |
---|---|
Manufacturer | TOYOTA MOTOR CO., LTD. |
Mfr Report Date | 19671001 |
NHTSA Campaign ID | 68V101000 |
Notes | POSSIBILITY THAT SCREWS WITHIN CARBURETOR AUTOMATIC-CHOKE MECHANISM SECURING THERMOSTAT HOUSING MAY BECOME LOOSE.IN VERY RARE CASES, DROPPING OF SCREWS WITHIN HOUSING MAY INTERFERE WITH CHOKE MECHANISM, PREVENTING THROTTLE LEVER FROM RETURNING TO IDLE POSITION AND MAKING VEHICLE DIFFICULT TO STOP.(CORRECT BY INSPECTING SCREWS AND TIGHTENING AND CAULKING WHERE NECESSARY.) |
Data updated June 2024
1968 Averages
Avg. Car Cost : | $2,822 |
Avg. Household Income : | $7,850 |
Avg. Home : | $14,950 |
Avg. Gallon of Gas : | $0.34 |
1968 Toyota Corona FAQs (show)
Popular frequently asked questions include:
What are the dimension and mechanical specifications of the 1968 Toyota Corona?
Q: How fast is the 1968 Toyota Corona? A: The 1968 Toyota Corona has a top speed of 91 mph. Q: What is the wheelbase size of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a wheelbase size of 95.30 inches.Q: What is the length of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a length of 162.40 inches.Q: What is the width of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a width of 61.00 inches.Q: How much did the 1968 Toyota Corona cost when new?A: The 1968 Toyota Corona cost approximately $1,800 to $2,000 (USD) when new.Q: What were the bodystyles of the 1968 Toyota Corona? A: The 1968 Toyota Corona was offered as a Hardtop Coupe, Sedan.Q: What tires did the 1968 Toyota Corona have? A: The 1968 Toyota Corona had 5.60x13 tires.Q: How many vehicles did Toyota produce in 1968? A: Toyota produced 476,807 automobiles in 1968.Q: What engine did the 1968 Toyota Corona have? A: The engine powering the 1968 Toyota Corona was a Inline 4 (1879 cc | 114.7 cu in. | 1.9 L.) with 90 BHP (66.24 KW) @ 4600 RPM and 110 Ft-Lbs (149 NM) @ 2600 RPM. Q: What transmission did the 1968 Toyota Corona have? A: The 1968 Toyota Corona had a 3 speed Manual Column shift gearbox.
What are the dimension and mechanical specifications of the 1968 Toyota Corona?
How many 1968 Toyota Corona were produced?
How powerful was the 1968 Toyota Corona? Was the 1968 Toyota Corona popular? Was the 1968 Toyota Corona expensive? What was the fuel economy of the 1968 Toyota Corona?
Q: How fast is the 1968 Toyota Corona? A: The 1968 Toyota Corona has a top speed of 91 mph. Q: What is the wheelbase size of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a wheelbase size of 95.30 inches.Q: What is the length of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a length of 162.40 inches.Q: What is the width of the 1968 Toyota Corona? A: The 1968 Toyota Corona has a width of 61.00 inches.Q: How much did the 1968 Toyota Corona cost when new?A: The 1968 Toyota Corona cost approximately $1,800 to $2,000 (USD) when new.Q: What were the bodystyles of the 1968 Toyota Corona? A: The 1968 Toyota Corona was offered as a Hardtop Coupe, Sedan.Q: What tires did the 1968 Toyota Corona have? A: The 1968 Toyota Corona had 5.60x13 tires.Q: How many vehicles did Toyota produce in 1968? A: Toyota produced 476,807 automobiles in 1968.Q: What engine did the 1968 Toyota Corona have? A: The engine powering the 1968 Toyota Corona was a Inline 4 (1879 cc | 114.7 cu in. | 1.9 L.) with 90 BHP (66.24 KW) @ 4600 RPM and 110 Ft-Lbs (149 NM) @ 2600 RPM. Q: What transmission did the 1968 Toyota Corona have? A: The 1968 Toyota Corona had a 3 speed Manual Column shift gearbox. Similarly Sized Vehicles
from 1968
Similarly Priced Vehicles
Toyota Monthly Sales Volume
March 2024
184,123
September 2023
177,654
June 2023
168,680
March 2023
150,099